Luoshan Journal
2 min read

Developing at home: a simple black-and-white kit

What I actually use to develop black-and-white film in a small apartment kitchen, mistakes included.

People assume home developing needs a darkroom. It does not. I develop black-and-white film in a small kitchen, and the only time it needs to be dark is the two minutes it takes to load the reels.

The kit

  • A two-reel stainless steel tank and reels.
  • A changing bag for loading film without a darkroom.
  • HC-110 developer, a stop bath (or plain water), and a rapid fixer.
  • A thermometer, a few graduated cylinders and a kitchen timer.
  • Photo-Flo or a drop of wetting agent for the final rinse.
  • Clips and a quiet corner of the shower to hang the film.

All of it fits in one shoebox and cost less than a nice lens cap.

A typical run

I mix HC-110 at dilution B, which is one part syrup to thirty-one parts water, at 20°C. For HP5 at box speed that means about five minutes, with gentle inversions for the first thirty seconds and then ten seconds every minute.

After development: thirty seconds of stop, five minutes of fix, then a long rinse using the Ilford method of filling and inverting the tank five, ten and twenty times with fresh water.

Mistakes I made so you don't have to

  • Loading reels with damp hands. The film sticks and kinks. Dry your hands, then dry them again.
  • Ignoring temperature in summer. A tap at 26°C will add contrast and grain quickly.
  • Hanging film in a dusty room. Run the shower first to settle the dust.
The chemistry is forgiving. The handling is not.

Why bother

Partly cost, and partly speed: I can shoot in the afternoon and look at negatives the same evening. Mostly, though, it makes me a more careful photographer. When you know exactly what happens to each frame, you start exposing them more deliberately.