Scanning negatives with a digital camera
A simple, affordable setup for digitizing film with a camera and a macro lens, and the steps I use to invert color negatives.
Flatbed scanners are slow and dedicated film scanners are expensive and aging. For the last two years I have digitized everything with a digital camera, a macro lens and a light source. It is fast, sharp and surprisingly cheap if you already own a camera.
The setup
- Any digital camera with a 1:1 macro lens, or an older macro lens on an adapter.
- A copy stand, or a sturdy tripod pointing straight down.
- A high-CRI LED light panel as the backlight.
- A film holder that keeps the negative flat and masks stray light.
Keep the room dark and turn off overhead lights. Stray light reflecting off the film base lowers contrast more than anything else.
Capturing
Shoot in RAW at base ISO, with the lens at f/5.6 or f/8. Focus manually using magnified live view on the grain itself. Expose so the brightest part of the film base is close to, but not touching, the right edge of the histogram.
For 35mm, one frame per negative is plenty. For medium format, I sometimes stitch two captures for very large prints.
Inverting color negatives
Black-and-white is easy: invert, set black and white points, done. Color negatives have an orange mask that needs to be removed.
- White balance on the clear film border between frames.
- Invert the image.
- Set black and white points for each color channel separately.
- Adjust overall color by eye, using something neutral in the frame.
A good scan is just a well-made photograph of another photograph.
The first roll took me an hour. Now I can do a roll of 36 in about fifteen minutes, including dust removal.